Flowmeters and System Solutions

Flowmeters and System solution.

MENU

PRODUCTS

Smart type ULTRA UF-Ⅱ

Format:LRS, LBS

Liquid

Gas

Steam

スマートタイプ ウルトラUF-Ⅱ_容積流量計_01

スマートタイプ ウルトラUF-Ⅱ_容積流量計_02

スマートタイプ ウルトラUF-Ⅱ_容積流量計_03

スマートタイプ ウルトラUF-Ⅱ_容積流量計_01

スマートタイプ ウルトラUF-Ⅱ_容積流量計_02

スマートタイプ ウルトラUF-Ⅱ_容積流量計_03

The ULTRA UF-II is installed with a multifunctioned smart type ULTRA register with a communication function.
Through OVAL's Smart Communication Unit (EL2310) connected to a Personal Computer various kinds of process parameter s including self diagnosis can be monitored on the CRT of the PC.
Easy access to a process is just on of the merits of the advanced intelligent Smart type ULTRA UF-II.

  • explosionproof
  • battery powered model
Features
Product Specifications
Document

FEATURES

1. Equalized rotating speed and torque of rotors and non fractured flow rate can be obtained continuously by the special spiral rotors. Low level of rotation noise and vibration are guaranteed. Uniform motion of the rotors reduces pressure loss through the meter.
2. High level of durability can be maintained during operation because there,s no sliding contact in the meshing point of rotors alternately.
3. Large quantity per revolution and higher allowable rotating speed of the rotors make the maximum flow rate of flowmeter larger for the compact size.
4.The measuring chamber is simply composed of a couple of the rotors without attachment of a pilot gear for each.

Applicable fluid

gasoline

kerosene

light oil

other

GENERAL SPECIFICATIONS

Meter Body(Meter size:80, 81)

Meter size 80 81
Nominal size (mm) 100 (4″) , *80 (3″) 100 (4″)
Flange rating FC250…JIS 10K FF, ASME 125 FF
SCPH2…JIS 10K RF, ASME/JPI 150 RF
Applicable fluid Gasoline, Kerosene, Gas oil, Fuel oil, and other Petroleum products (except Naphtha, LPG)
Flow range See flow range table
Operating temp.
range
Process -5 to +120°C (FC250 : 0 to 120°C)
Amblent More than -10℃
Max. operating pressure 0.98 MPa for FC250, 1.37MPa for SCPH2
Linearity ±0.15%
Material Body FC250 (Cast iron) + Surface treatment or SCPH2 (Cast steel) + Surface treatment
Rotor FC250+Surface treatment
Bearing Carbon
Flow direction Right→Left (st’d), Left→Right, Bottom→Top, Top→Bottom
Coating color Munsell 2.5G 8/2

*:Special

Meter Body (Meter size:82, 83, 84, 85, 86, 87, 88)

Meter size 82 83 84 85 86 87 88
Nominal size (mm) 150 (6″)
*100 (4″)
200 (8″)
*150 (6″)
250 (10″)
*200 (8″)
300 (12″)
*250 (10″)
350 (14″)
*300 (12″)
400 (16″)
*350 (14″)
450 (18″)
*400 (16″)
Flange rating JIS 10K RF, JIS 20K RF, ASME/JPI 150 RF
Applicable fluid Gasoline, Kerosene, Gas oil, Fuel oil, and other Petroleum products (except Naphtha)
Flow range See flow range table
Operating temp.
range
Process -5 to +120°C
Amblent More than -10°C
Max. operating pressure 1.96MPa
Linearity ±0.35% or ±0.15%
Material Body SCPH2 or SCPH2 (Cast steel)+Surface treatment
Rotor FC250 or FC250+Surface treatment
Bearing Carbon
Flow direction Right→Left (st’d), Left→Right, Bottom→Top, Top→Bottom
Coating color Munsell 2.5G 8/2

*:Special

Specification

*You need to fill out the questionnaire to download documents.

GBL107E-5N

80, 81, 82, 83, 84, 85, 86, 87, 88(80 to 450mm)

Features
Product Specifications
Document

INQUIRY

フォームが表示されるまでしばらくお待ち下さい。

フォームが表示されるまでしばらくお待ち下さい。

INQUIRY