Vortex Flowmeter

TOPpage > Product Guide TOP > Flowmeters TOP > Vortex Flowmeter > DELTA FLOWPET DX

Categorization by measurement principle
FlowmetersFlowmeters for liquidFlowmeters for gasFlowmeters for steam

DELTA FLOWPET DX/High accuracy and inexpensive with pressure compensation

(Without pressure compensated) (With pressure compensated)
(Without pressure compensation)

(With pressure compensation)


DELTA FLOWPET DX (with pressure compensation) is a piezoelectric DELTA vortex flowmeter combined with a built-in pressure sensor. It measures mass flows of saturated steam and gas with corrected for pressure. Liquid, gas, and stream are measurable for volume flow measurement.



Incorporation of a pressure sensor and pressure correction circuitry reduces instrumentation cost and simplifies the system.


Both analog and correction pulse outputs are available at the same time.


Easy to maintain, reducing maintenance cost and enhancing safety.

Major specifications
Model With pressure compensation
(Saturated steam, gas)
Without pressure compensation
(Liquid, gas, steam)
Nominal size 15, 25, 40, 50, 80, 100, 150mm
Connection Wafer type
Connection standard JIS 10K ASME/JPI 150 JIS 10, 20, 30K ASME/JPI 150, 300

Flow range

Fluid (water) 0.8 to 645m3/h (7 types)
Gas (0.2 MPa air) 4.0 to 2780m3/h (7 types)
 (0.5 MPa saturated steam)
12.4 to 8820kg/h (7 types)
Operating temp. range Maximum +200°C –30 to +200°C
Max. operating pressure 1.0MPa 1.45MPa 5.0MPa 5.0MPa
Accuracy ±2% of reading * ±1% of reading
Power supply DC-powered
Body material SCS14A
Configuration Non-explosionproof configuration, IP65 or equivalent
Output Pulse (flowrate), Analog (flowrate or pressure)

*: Accuracy at the pressure of 0.25 MPa or more. ±3% or RD in case of 0.06 to 0.25 MPa.

To General Specification and Catalog Page
Inquiry for this product