Flowmeters and System Solutions
Flowmeters and System solution.
Flowmeters and System Solutions
Flowmeters and System solution.
PRODUCTS
Liquid
Gas
Steam
A thermistor sensor picks up the occurrence of vortex caused by the flow velocity change in the manner -- changes in thermistor temperature -- changes in resistance value -- a train of pulses proportional to the flow velocity and measures the flowrate.
Gas purge type is configured to be purged with a clean gas (room temperature) from an external source to the thermistor sensor. Therefore, the fluid to be measured does not touch the thermistor sensor, permitting accurate flow measurement of gases containing dust and mist, low-temperature gases, or others previously thought difficult to be measured.
● Low-pressure loss thanks to the absence of moving parts
● High maintainability (Replaceable type is available.)
● High repeatability
● Accurate measurement of gasses containing dust and mist and high and low-temperature gases is possible.
div class=”detail-item”>
| Model | Gas purge type | |
|---|---|---|
| Nominal size | Wafer type | 50 to 150mm |
| Flange type | 200 to 500mm | |
| Applicable tube size | － | |
| Flow range | Gas (0.2 MPa air) | 21 to 19000m3/h3/h(9 types) |
| Operating temp. range | –20 to +130°C (Depends on body material.) |
|
| Flange standard | JIS 10K ASME150 |
|
| Max. operating pressure | Less than 1MPa | |
| Accuracy | ±1% of reading or ±1% of full scale | |
| Applicable fluids | Gas | |
| Power supply | DC-powered | |
| Configuration | Explosionproof or non-explosionproof, IP65 or equivalent | |
| Output | Pulse | |
*You need to fill out the questionnaire to download documents.
Insertion Type (for Exhaust Gas)
