Flowmeters and System Solutions

Flowmeters and System solution.

MENU

PRODUCTS

K-BAR 2000B / Multipoint Insertion Type Thermal Mass Flowmeter

Format:K-BAR

Liquid

Gas

Steam

気体用マスフローメータ(マルチポイント挿入形)_熱式質量流量計

気体用マスフローメータ(マルチポイント挿入形)_熱式質量流量計

K-BAR2000B is a thermal mass flowmeter for gas measurement. Its measuring principle takes advantage of the fact that calorie amount taken away from the heated sensor by a fluid flow is correlated to the mass flow. The sensor inserted in the pipeline samples and averages the flowrate at multiple points through the pipe to infer the total flowrate.

  • energy saving
  • high function,high performance
  • high and low temperature service model
  • explosionproof
Features
Product Specifications
Document

FEATURES

1. Supports large scale duct and stack.
2. Installation of multiple sensors (four maximum) makes preparation of long straight pipe for large bore pipe unnecessary.
3. Allows measurement of flowrate lower than pitot tube.
4. Measurement is possible at high temperature (260°C and 500°C).
5. High durability by the use of a sensor of all-welded construction.
6. Easy to install.
7. Wide range of 0 to 55 m/s (normal)
8. Very quick response
9. Concurrent measurement of temperature and mass flowrate at each sensor position
10. Compensation of pressure and temperature is unnecessary.

Applicable fluid

air

nitrogen

other

GENERAL SPECIFICATIONS

Type K-BAR 2000B
Flow metering range 0~55m/s(normal)
Ambient temp. range
(Process)
Standard: -40 to +260°C, High temperature service: -40 to +500°C
Actual operating temperature range depends on the specifications for flange, pressure, etc.
Max. operating pressure Less than 1MPa
Materials Sensor: Alloy C276 (equivalent to Hastelloy C276)
Sensor support: SUS316L (Standard), Alloy C276 (equivalent to Hastelloy C276)
Repeatability 0.25%
Response Flowrate: Time constant 1s (at 27.5m/s (normal) of flowrate), Temperature: Time constant 8s (at 27.5m/s (normal) of flowrate)
Power supply Supplied from mass flow computer (Power supply, display, output are available with dedicated mass flow computer.)
Output Analog (4~20mADC)×2
Waterproof configuration NEMA 4X/IP66
Explosionproof(ATEX) GroupⅡ、Cat.3、Explosive Gas and Dust Atmospheres、
Ⅱ3GD、EExnAⅡ5 T5X
Operating temp. range -40 to +65°C
Weight 9kg approx.(Standard)

Specification

*You need to fill out the questionnaire to download documents.

GBF110E-1

Multipoint Insertion Type Thermal Mass Flowmeter K-BAR 2000B

Features
Product Specifications
Document
Back

INQUIRY

INQUIRY