Flowmeters and System Solutions
Flowmeters and System solution.
Flowmeters and System Solutions
Flowmeters and System solution.
PRODUCTS
Liquid
Gas
Steam
When metering a liquid with a flowmeter, accurate flow measurement is not possible, if entrained air or gas is present in the liquid. Especially, such entrainment may take place at the beginning or the end of a given metering run. An air eliminator is used to remove entrained air and gas beforehand to ensure correct liquid flowrate measurement.
A model complying with the standard of Second Class Pressure Vessels, a model for high-pressure liquids, and a model combined with a strainer are also available.
● Abundant lineup
(1) Low-pressure air separator (for general liquid loading) Class 2 pressure vessel approved product
(2) Low-pressure air separator (for general liquids unloading) Class 2 pressure vessel approved product
③ Low-pressure air separator (for general liquid loading) Class 2 pressure vessel exemption
④ High-pressure air separator (gas-liquid separator) for special liquids and high-pressure liquids
⑤ Air separator for strainer (for general liquid loading)
| Model | Low pressure type | High pressure type (for loading) |
スWith strainer function (for loading) |
||||
|---|---|---|---|---|---|---|---|
| For loading | For unloading | ||||||
| Nominal size | 100 to 500mm | 50 to 500mm | 40 to 200mm | 25, 40, 50mm | |||
| Connection | JIS,ASME/JPI flange | ||||||
| Max. operating pressure | 0.97MPa | 2.94MPa* | 0.97MPa | ||||
| Max. operating temperature | 80°C | 120°C | 110°C | ||||
*: Depends on connection standard
*You need to fill out the questionnaire to download documents.
For Loading Service
For Unloading Service
Non-Regulative Type for Loading Service
25, 40, 50mm