Flowmeters and System Solutions
Flowmeters and System solution.
Flowmeters and System Solutions
Flowmeters and System solution.
PRODUCTS
Format：UP1
Liquid
Gas
Steam
Using our prominent sensing technology and experience, this ultrasonic flowmeter for gas service, the Psonic-1, has achieved a high degree of meter accuracy and sensitivity.
Its performance is remarkable under extremely low pressure and flow rate ranges.
By using a built-in microprocessor plus communication interface (RS- 485), its transmitter enables you to establish and alter parameters such as flow range and output pulse units, and verify self diagnostics remotely.
1. Precisely measures over a broad flow range from the very low flow range. Flow velocity resolution is 1 mm/sec.
2. Accepts bidirectional flows - both forward and reverse flow.
3. Has intelligent capabilities to remotely configure and change parameters such as flow range, output pulse units, and nominal size, and monitor the
operating status of the meter with self-diagnostic capability with a built-in communication interface (RS-485).
4. Accuracy is guaranteed by fully-equipped testing facilities, using actual air flows.
5. Simple design with no moving parts offers long life and no aging degradation of accuracy.
6. Saves energy with no pressure loss.
air
nitrogen
natural gas
other
| Nominal size | 50, 80, 100, 150, 200, 250, 300mm※1 | ||
|---|---|---|---|
| Connection | JIS 10, 20, 30K Flange, JPI 150, 300 Flange | ||
| Flow speed range | –30 to +30m/s | ||
| Operating temp. range | –30 to +80°C | ||
| Max. operating pressure | 1.96 MPa (depends on connection standard) | ||
| Accuracy | ±1% of reading + ±0.03% of full scale (Above 104 in Reynolds number) ±1% of full scale (Above 2300 in Reynolds number) |
||
| Applicable fluids | Gas (Air, natural gas, nitrogen, etc.) | ||
| Body material | SUS304TP＋SUSF304 | ||
| Configuration | Explosionproof or non-explosionproof, IP65 or equivalent | ||
| Power supply | AC-powered | ||
| Output | Analog, pulse (flowrate, forward and reverse flow signal)） | ||
※1：Can manufacture the model for 350 to 600 mm.
*You need to fill out the questionnaire to download documents.
for Gas
