This instrument receives a pulse signal from a flowmeter, etc., shapes it and, after isolation and scaling, supplies two sets of pulse outputs with a desired frequency division and pulse width.
|Power supply for combined instrument||8.5, 13.5, 24, 32 VDC (depends on combined flowmeter)|
|Input signal||Pulse (Current, voltage, open collector, contact)
Max. 3 kHz *1
|Output after scaler
|Kinds||Open MOS-FET x 2 outputs|
|Scaler||0.0001 to 1.9999 (settable in 0.0001 steps)|
|Frequency division||1/1, 1/10, 1/100, 1/1000, 1/10000|
|Output width||1ms or 50ms|
|Input synchronization output||Open collector pulse|
|Ambient temperature||–10 to +50°C|
|Power supply||AC- or DC-powered|
*1 : There are limits of capability depending on the combined flowmeter.
*: Scaler setting cannot be set individually for two outputs.
*: For frequency division, two outputs can be set individually.